Shipping:

We offer free insured shipping on most orders. Orders usually require 20–30 days for preparation and quality inspection before shipment.

Standard DDP sea shipping usually takes around 30–35 days after dispatch and includes customs clearance and import duties for most destinations.

Delivery timelines are estimates and may vary by destination, product size, customs clearance, or carrier schedules.

For more details, please view our Shipping Policy.

Returns:

Standard products may be returned within 30 days after delivery if they are unused, uninstalled, and in original packaging.

Special sizes, special finishes, modified hanging heights, and open-box items are not refundable unless they arrive damaged or defective.

If your order arrives damaged, please contact us within 7 days with photos.

For complete details, please view our Refund Policy.

Crystal Bubbles Balls Pendant Lamp FAQ

How many Crystal Bubbles Balls Pendant Lamp pendants should I use over my island or table?

Start with the listed size data: 1 Head - Round Canopy: Dia 10cm x H 150cm / ∅ 3.9″ x H 59″; 3 Heads - Round Canopy: Dia 15cm x H 150cm / ∅ 5.9″ x H 59″; 5 Heads - Round Canopy: Dia 15cm x H 150cm / ∅ 5.9″ x H 59″; 7 Heads - Round Canopy: Dia 20cm x H 150cm / ∅ 7.8″ x H 59″; 9 Heads - Round Canopy: Dia 40cm x H 200cm / ∅ 15.8″ x H 78.7″; 11 Heads - Round Canopy: Dia 40cm x H 200cm / ∅ 15.7″ x H 78.7″; 11 Heads - Square Canopy: L 40cm x H 200cm / L 15.7″ x H 78.7″; 14 Heads - Round Canopy: Dia 50cm x H 250cm / ∅ 19.7″ x H 98.4″; additional size options are available on the product page. For multiple pendants, plan the count around island length, shade width, and end clearance rather than copying a photo. A common starting point is to keep pendants roughly 6-12 inches in from the island ends and space them evenly, then adjust for the shade diameter and sight lines.

What if my electrical box is not centered over the island or dining table?

Do not ignore the box position. Measure the distance from the box to the island centerline and send a ceiling photo before ordering. Depending on the fixture, the solution may be a longer canopy, adjusted cord drop, swag-style routing, or moving the box; the right choice depends on ceiling structure and how visible the offset will be.

How low should this pendant hang so people do not hit it or see glare?

Over a counter or table, start with the bottom about 30-36 inches above the surface. Then check the tallest user, sight line across the island, shade height, and bulb visibility. If the pendant has clear glass or exposed LEDs, dimming and warmer color temperature may matter as much as the hanging height.

What measurements should I send before asking for a custom cord, canopy, or finish?

Send the product link, ceiling height, island or table length and width, current electrical-box location, desired number of pendants, finish preference, and one straight-on ceiling photo. Bling Lighting Studio can use those details to check spacing, canopy feasibility, color temperature, and whether customization should be reviewed before production.

Is this pendant light better for sparkle or soft ambient light?

Crystal and faceted designs are usually chosen for sparkle, reflection, and a more formal statement effect. If you want a softer glow with less visual contrast, alabaster or shaded glass may be a better fit.

Customization:

Most fixtures can be adjusted to better fit your space.

Popular changes include:

• Hanging length
  
• Fixture size
  
• Finish color
  
• Light color temperature
  
• Canopy style
  
• Dimmable option
  

Some simple changes may be complimentary, while larger adjustments may affect price and lead time.

For more details or project customization, please view our Customization Service.

Crystal Bubbles Balls Pendant Lamp Buying Guide

Crystal Bubbles Balls Pendant Lamp buying guide: choose this pendant light by the listed dimensions, your actual room measurements, and how the piece will be installed or used every day. The notes below are written to help you avoid the pendant-light problems buyers usually ask about: wrong island spacing, a shade that hangs too low, glare over the counter, an off-center electrical box, or a canopy that cannot cover the planned layout.

Product Data to Check First

Listed size data: 1 Head - Round Canopy: Dia 10cm x H 150cm / ∅ 3.9″ x H 59″; 3 Heads - Round Canopy: Dia 15cm x H 150cm / ∅ 5.9″ x H 59″; 5 Heads - Round Canopy: Dia 15cm x H 150cm / ∅ 5.9″ x H 59″; 7 Heads - Round Canopy: Dia 20cm x H 150cm / ∅ 7.8″ x H 59″; 9 Heads - Round Canopy: Dia 40cm x H 200cm / ∅ 15.8″ x H 78.7″; 11 Heads - Round Canopy: Dia 40cm x H 200cm / ∅ 15.7″ x H 78.7″; 11 Heads - Square Canopy: L 40cm x H 200cm / L 15.7″ x H 78.7″; 14 Heads - Round Canopy: Dia 50cm x H 250cm / ∅ 19.7″ x H 98.4″; additional size options are available on the product page. Likely placements include dining room, kitchen island, foyer, staircase, living room.

Choose the Right Size

• 36 Heads - Square Canopy around 27.6 inches long works best over a table or island about 42-54 inches long. If the surface is shorter than that, the fixture can feel crowded near the ends.
• 14 Light around 31.5 inches long works best over a table or island about 42-54 inches long. If the surface is shorter than that, the fixture can feel crowded near the ends.
• 20 Light around 23.6 inches long works best over a table or island about 36-48 inches long. If the surface is shorter than that, the fixture can feel crowded near the ends.
• For a linear pendant or branch chandelier over an island, keep the fixture visually shorter than the surface. A practical starting point is about 12-24 inches shorter than the island or table, then adjust for room width and ceiling height.
• If the product has multiple light-count options, choose the count before production. Changing the count later can change canopy layout, wiring, spacing, and the finished balance over the surface.

Hanging Height and Placement

• Over a kitchen island or dining surface, start with the bottom of the pendant about 30-36 inches above the counter or tabletop.
• For open kitchens, check the standing sight line across the island. If the shade blocks faces or the view into the room, raise the fixture or choose a slimmer profile.
• If the electrical box is off center, measure the offset from the surface centerline and send a ceiling photo before ordering. The solution may require a longer canopy, adjusted cord route, or moving the box.

Options, Finish, and Maintenance

• Crystal is chosen for sparkle, but it shows dust and fingerprints. Decide how you will clean the fixture before choosing a high or hard-to-reach installation point.
• For custom size, finish, hanging length, color temperature, or project quantity, contact Bling Lighting Studio before production so the request can be checked against real measurements.

Send These Measurements Before Ordering

Send Bling Lighting Studio the product link, island or table length and width, ceiling height, existing electrical-box positions, desired number of pendants, and a straight-on photo of the ceiling. We can help confirm spacing, hanging height, canopy placement, finish, and color temperature before you order.

Why Choose Bling Lighting Studio?

Bling Lighting Studio specializes in custom decorative lighting, with a focus on alabaster lighting, branch chandeliers, staircase chandeliers, selenite lighting, and Murano glass lighting.

Many standard lighting brands only, selenite lighting, and Murano glass lighting.

Many standard lighting brands only offer fixed sizes, fixed finishes, and limited color options. If the listed size or finish does not fit your space, customization can be difficult, slow, or unavailable.

Bling Lighting Studio works differently. For selected designs, we can adjust the fixture based on your room size, ceiling height, installation needs, interior style, and project timeline.

Custom Options We Can Support

• 
  Custom fixture size
  
• 
  Custom hanging height
  
• 
  Custom canopy size and shape
  
• 
  Custom metal finish
  
• 
  Custom glass color
  
• 
  Custom branch layout
  
• 
  Custom pendant quantity
  
• 
  Custom staircase drop arrangement
  
• 
  Custom alabaster, selenite, or Murano-style glass layout
  

Faster Custom Process

For many custom requests, we can provide a drawing or layout proposal within 24 hours after receiving the key project details.

Once the drawing is confirmed, custom production can often be completed within about 20 days, depending on the design complexity, material requirements, and order quantity.

Our Main Specialties

Alabaster Lighting

Custom alabaster chandeliers, pendants, wall sconces, flush mounts, and linear fixtures.

Branch Chandeliers

Custom branch chandeliers for dining rooms, living rooms, foyers, villas, hotels, and hospitality spaces.

Staircase Chandeliers

Custom chandelier layouts for high ceilings, stairwells, entryways, and multi-level spaces.

Selenite Lighting

Natural stone lighting with a clean, vertical, architectural look.

Murano Glass Lighting

Murano-style petal, disc, tube, branch, wall, pendant, and artistic glass fixtures.

Why This Matters

A chandelier should fit the space, not the other way around.

If a standard fixture is too small, too large, too short, too long, or not the right finish, we can help adjust the design before production. This is especially useful for staircase chandeliers, large chandeliers, custom alabaster lighting, branch chandeliers, selenite fixtures, and Murano glass lighting projects.

Best For

• 
  Homeowners who need a custom size or finish
  
• 
  Interior designers working on project specifications
  
• 
  Builders and contractors who need lighting adjusted to site conditions
  
• 
  Hotels, villas, restaurants, and commercial spaces
  
• 
  Stairwells, foyers, dining rooms, living rooms, bedrooms, and high-ceiling spaces
  

Short Summary

Choose Bling Lighting Studio if you need custom alabaster lighting, branch chandeliers, staircase chandeliers, selenite lighting, or Murano glass lighting. We support custom size, color, finish, canopy, hanging height, layout, and material adjustments for selected fixtures, with faster drawing support and flexible custom production.