Shipping:

We offer free insured shipping on most orders. Orders usually require 20–30 days for preparation and quality inspection before shipment.

Standard DDP sea shipping usually takes around 30–35 days after dispatch and includes customs clearance and import duties for most destinations.

Delivery timelines are estimates and may vary by destination, product size, customs clearance, or carrier schedules.

For more details, please view our Shipping Policy.

Returns:

Standard products may be returned within 30 days after delivery if they are unused, uninstalled, and in original packaging.

Special sizes, special finishes, modified hanging heights, and open-box items are not refundable unless they arrive damaged or defective.

If your order arrives damaged, please contact us within 7 days with photos.

For complete details, please view our Refund Policy.

Brighton Alabaster Ball Chandelier FAQ

What room or table size works best for the Brighton Alabaster Ball Chandelier?

Use the listed size data first: 7 Heads: Dia 30cm x H 150cm / ∅ 11.8″ x H 59″; 9 Heads: Dia 40cm x H 150cm / ∅ 15.7″ x H 59″; 12 Heads: Dia 40cm x H 200cm / ∅ 15.7″ x H 78.7″; 15 Heads: Dia 60cm x H 250cm / ∅ 23.6″ x H 98.4″; Suspension Cord: Up to 80″ adjustable / approx. 203 cm, extendable upon request. For room scale, add room length and width in feet to estimate a target chandelier diameter in inches. Over a dining table, the chandelier should usually be narrower than the table and balanced with ceiling height. Send us the room and table measurements if the fixture is close to the edge of either rule.

How high should the bottom of this chandelier hang?

Over a dining table, start around 30-36 inches above the tabletop. In a walk-through room, keep the bottom around 7 feet or higher from the floor. For high ceilings, also check whether the chandelier has enough vertical presence; a wide but short fixture can look stranded in a tall room.

What if my ceiling box is not centered over the table or seating area?

Measure the offset before ordering. Depending on the design, a longer canopy, adjusted chain, swag route, or moving the box may be needed. The finished look depends on how visible the offset is from the main entry and seating angles, so send ceiling photos to Bling Lighting Studio for review.

What should the installer check before hanging a heavy chandelier?

The installer should confirm box rating, framing support, canopy coverage, wire access, dimmer compatibility, and whether the fixture can be lifted and assembled safely. Heavy crystal, stone, branch, and multi-tier chandeliers should not be supported by a decorative ceiling cover alone.

Will the alabaster on this chandelier look exactly like the photos?

No. Natural alabaster can vary in veining, tone, thickness, and translucency. This variation is normal and is part of the material. If you need a very specific tone for a project, contact us before production so we can discuss expectations.

What should I send before asking Bling Lighting Studio to adjust size or drop, finish, canopy detail?

Send the product link, room measurements, ceiling or wall photos, installation point, finish expectations, and target delivery country before production. Custom work should be checked against real measurements because a small change in drop, canopy, or finish can affect installation, lead time, and whether the finished fixture solves the room problem.

Customization:

Most fixtures can be adjusted to better fit your space.

Popular changes include:

• Hanging length
  
• Fixture size
  
• Finish color
  
• Light color temperature
  
• Canopy style
  
• Dimmable option
  

Some simple changes may be complimentary, while larger adjustments may affect price and lead time.

For more details or project customization, please view our Customization Service.

Brighton Alabaster Ball Chandelier Buying Guide

Brighton Alabaster Ball Chandelier buying guide: choose this chandelier by the listed dimensions, your actual room measurements, and how the piece will be installed or used every day. The notes below are written to help you avoid the chandelier problems buyers usually ask about: wrong diameter for the room, wrong hanging height over a table, an off-center ceiling box, weak ceiling support, or difficult cleaning access.

Product Data to Check First

Listed size data: 7 Heads: Dia 30cm x H 150cm / ∅ 11.8″ x H 59″; 9 Heads: Dia 40cm x H 150cm / ∅ 15.7″ x H 59″; 12 Heads: Dia 40cm x H 200cm / ∅ 15.7″ x H 78.7″; 15 Heads: Dia 60cm x H 250cm / ∅ 23.6″ x H 98.4″; Suspension Cord: Up to 80″ adjustable / approx. 203 cm, extendable upon request. Finish or color options shown on the product data include 7 Lights, 9 Lights, 12 Lights, 15 Lights. Likely placements include dining room, foyer, staircase, living room, bedroom.

Choose the Right Size

• 7 Heads (11.8 inches wide, 59 inches high) should be checked against room width, ceiling height, furniture size, and cleaning access.
• 9 Heads (15.7 inches wide, 59 inches high) should be checked against room width, ceiling height, furniture size, and cleaning access.
• 12 Heads (15.7 inches wide, 78.7 inches high) should be checked against room width, ceiling height, furniture size, and cleaning access.
• 15 Heads (23.6 inches wide, 98.4 inches high) should be checked against room width, ceiling height, furniture size, and cleaning access.
• Suspension Cord (80 inches wide) should be checked against room width, ceiling height, furniture size, and cleaning access.
• For a round or central chandelier, add the room length and width in feet to estimate a target diameter in inches, then adjust for ceiling height and the visual weight of the material.
• Over a dining table, keep the chandelier narrower than the table. If the table is narrow, prioritize a slimmer fixture even if the room itself is wide.

Hanging Height and Placement

• Over a dining table, start with the bottom about 30-36 inches above the tabletop. Raise it slightly for very tall users, tall centerpieces, or a fixture with strong glare.
• In a living room or walk-through space, keep the bottom around 7 feet or higher from the floor.
• For sloped or vaulted ceilings, check whether the canopy and suspension can hang level. Send ceiling photos before ordering if the slope is steep.

Options, Finish, and Maintenance

• Finish or color options shown for this product include 7 Lights, 9 Lights, 12 Lights, 15 Lights. Compare these with nearby hardware, faucets, railings, cabinet pulls, and furniture legs before ordering.
• Natural stone shades vary in veining, tone, thickness, and translucency. If you need a very even color across multiple pieces, ask before production.
• For custom size, finish, hanging length, color temperature, or project quantity, contact Bling Lighting Studio before production so the request can be checked against real measurements.

Send These Measurements Before Ordering

Send Bling Lighting Studio the product link, ceiling height, room length and width, furniture dimensions, ceiling-box position, desired bottom height, and installation photos. We can help confirm size, hanging height, finish, color temperature, ceiling support questions, and whether customization should be reviewed before you order.

Why Choose Bling Lighting Studio?

Bling Lighting Studio specializes in custom decorative lighting, with a focus on alabaster lighting, branch chandeliers, staircase chandeliers, selenite lighting, and Murano glass lighting.

Many standard lighting brands only, selenite lighting, and Murano glass lighting.

Many standard lighting brands only offer fixed sizes, fixed finishes, and limited color options. If the listed size or finish does not fit your space, customization can be difficult, slow, or unavailable.

Bling Lighting Studio works differently. For selected designs, we can adjust the fixture based on your room size, ceiling height, installation needs, interior style, and project timeline.

Custom Options We Can Support

• 
  Custom fixture size
  
• 
  Custom hanging height
  
• 
  Custom canopy size and shape
  
• 
  Custom metal finish
  
• 
  Custom glass color
  
• 
  Custom branch layout
  
• 
  Custom pendant quantity
  
• 
  Custom staircase drop arrangement
  
• 
  Custom alabaster, selenite, or Murano-style glass layout
  

Faster Custom Process

For many custom requests, we can provide a drawing or layout proposal within 24 hours after receiving the key project details.

Once the drawing is confirmed, custom production can often be completed within about 20 days, depending on the design complexity, material requirements, and order quantity.

Our Main Specialties

Alabaster Lighting

Custom alabaster chandeliers, pendants, wall sconces, flush mounts, and linear fixtures.

Branch Chandeliers

Custom branch chandeliers for dining rooms, living rooms, foyers, villas, hotels, and hospitality spaces.

Staircase Chandeliers

Custom chandelier layouts for high ceilings, stairwells, entryways, and multi-level spaces.

Selenite Lighting

Natural stone lighting with a clean, vertical, architectural look.

Murano Glass Lighting

Murano-style petal, disc, tube, branch, wall, pendant, and artistic glass fixtures.

Why This Matters

A chandelier should fit the space, not the other way around.

If a standard fixture is too small, too large, too short, too long, or not the right finish, we can help adjust the design before production. This is especially useful for staircase chandeliers, large chandeliers, custom alabaster lighting, branch chandeliers, selenite fixtures, and Murano glass lighting projects.

Best For

• 
  Homeowners who need a custom size or finish
  
• 
  Interior designers working on project specifications
  
• 
  Builders and contractors who need lighting adjusted to site conditions
  
• 
  Hotels, villas, restaurants, and commercial spaces
  
• 
  Stairwells, foyers, dining rooms, living rooms, bedrooms, and high-ceiling spaces
  

Short Summary

Choose Bling Lighting Studio if you need custom alabaster lighting, branch chandeliers, staircase chandeliers, selenite lighting, or Murano glass lighting. We support custom size, color, finish, canopy, hanging height, layout, and material adjustments for selected fixtures, with faster drawing support and flexible custom production.